Ring Sizing - If you know your ring size or finger measurements in mm you can use the above guide to choose which size is best for you. Be sure to allow for the size of your knuckle.

Circumference = Total circular measurement of inside ring hole. (If measuring finger this will be the full outside measurement all the way around your finger)

Diameter = Width of ring hole. (Thickness of finger)

Note: If you are in between ring sizes we recommend sizing up.
Note: If you cannot see your countries ring measurements you can use an online converter here, to find out which size would best suit you.

Use string to find your ring size:
  • Wrap a piece of loose string around your finger. Be sure to allow for the size of your knuckle.
  • With a pen, mark the point on the string where the end meets.
  • Measure string against a ruler in mm and compare to the above chart.
Bracelet Sizing

Bracelet sizes are listed as circumference in cm. To measure your wrist use a piece of string to wrap around wrist, cut where it joins and measure against a ruler in cm. Compare to CRAFTD sizing options available.
S/M = 22cm
M/L = 24cm